For Living Doll and Prosculpt

Warning:

For children over 8 Years only. For use under adult supervisor. 

Contents:

Modelling material consists of PVC and plasticizer (phthalik acid esters of straight chain aliphatic alcohols, from C6 upwards)

Basis Instructions:  

Wash hands and make sure work surface is clean. Work the clay on marble, glass, formica, lucite, aluminium foil, butcher`s paper or baking parchment. Avoid direct contact with wooden or fine furniture. Knead clay until soft and smooth.

Shape into the desired from and detail as required. Larger pieves may need bulking out inside with crushed aluminium foil. Thin areas may need armature wire for support. Work from light colours to dark colours. To clean hands use isopropyl alcohol, baby oil, or handi - wipes and then soap and water.

Baking the clay must be carried out by the supervising adult. Bake on an oven-proof glass surface at 130 ° C (275 °F) for 15 minutes per 6 mm (1/4") of thickness. Thicker pieces may require additional baking time. Let piece cool completely. Check the accuracy of your oven. Do NOT overbake. Use GOOD ventilation. Do NOT use a microwave oven.NOTE: toaster ovens should be set 20° lower as the items are closer to the heating element.

Painting - Sculpey can be painted or glazed with good quality water based acrylic paint products (JoSonja)

Sanding - When sanding baked clay items, wear a face mask, use wet/dry sandpaper, and sand under running water.

Gluid - Broken pieces can be glued with Smooting oil.

Storage - Sculpey polymer clay products will remain fresh if stored an a verry cool area, away from heat and direct sunlight. wrap in a plastic bag or aluminium foil for storage.

SAFETY INFORMATION

Do not place the modeling clay in the mouth. Do noth place modeling clay on the furniture. Do not exceed a temperature of 130 ° C (275°F) or harmful gases may be produced.Do not exceed ahardening time of 30 minutes. Thehardening process is not a part of the funktion of the toy and should be carried out by the supervising adult. Use a domestic oven thermometer, e.g. bimetal, to accuratly measure the themperature.  Do not use a glass thermometer. Do not use a microwave oven.

Keep younger children under the age of eight and animals awy from activity area. Store Sculpey modeling compound out of the reach of young children. Wash hands after working with the set or recommended in the instructions for use. Do not eat, drink or smoke in the activity area. 

First Aid - In case of accidental overheating an inhalation of poisonous gases remove person to fresh air and seek immediate medical advice. Bring the polymer clay materials  and the packed with you.

Disposal - Used Sculpey polymer clay can be disposed with the normal garbage.